Who Uses PropSpeed?
Anyone who is concerned with excessive fuel consumption, the increase in potential engine-fatigue, the increase in running-gear maintenance and their associated cost. No vessel is immune. Be it a tug-boat, naval ship, sailing yacht, motor yacht, fishing boat, or cruise ship! Today’s boat-owner would never consider launching his vessel in heavily fouled waters without protecting the bottom. The protection of the running gear is just as important for a vessels long-term performance.
Anyone who is concerned with excessive fuel consumption, the increase in potential engine-fatigue, the increase in running-gear maintenance and their associated cost. No vessel is immune. Be it a tug-boat, naval ship, sailing yacht, motor yacht, fishing boat, or cruise ship! Today’s boat-owner would never consider launching his vessel in heavily fouled waters without protecting the bottom. The protection of the running gear is just as important for a vessels long-term performance.
Why Use PropSpeed?
Boat-owners, captains and marine surveyors all agree that a vessel that’s just been launched with a clean bottom and clean running gear will run at peak-performance. Unfortunately that peak-performance running time can be short-lived due to the heavy build-up of marine growth. PropSpeed will assist in maintaining maximum vessel performance while allowing the running gear to do what it was designed for: Slice through the water with the least amount of friction generating the greatest amount of thrust.
Boat-owners, captains and marine surveyors all agree that a vessel that’s just been launched with a clean bottom and clean running gear will run at peak-performance. Unfortunately that peak-performance running time can be short-lived due to the heavy build-up of marine growth. PropSpeed will assist in maintaining maximum vessel performance while allowing the running gear to do what it was designed for: Slice through the water with the least amount of friction generating the greatest amount of thrust.
The Barnacle
Tiny barnacles and marine organisms that attach themselves to a boat’s propeller and running gear can wreak havoc on a boat’s performance, fuel efficiency and maintenance requirements turning the joy of boat ownership into a nightmare. These barnacles, algae and marine worms can grow right on the paint, and some actually eat through the paint and attached themselves to the underlying bronze exposing it to the additional corrosive effects of saltwater.
Tiny barnacles and marine organisms that attach themselves to a boat’s propeller and running gear can wreak havoc on a boat’s performance, fuel efficiency and maintenance requirements turning the joy of boat ownership into a nightmare. These barnacles, algae and marine worms can grow right on the paint, and some actually eat through the paint and attached themselves to the underlying bronze exposing it to the additional corrosive effects of saltwater.
Cavitation
Propellers move a vessel forward by pushing water aft in a spiral funnel pattern. Fouled propellers rapidly loose their efficiency by inducing air bubbles into the water funnel. This is known as “cavitation.” Additionally, fouled propellers can go out-of-balance causing undesirable vibration, resulting in increased wear on the shaft, cutlass bearing, transmission and other engine and drive-train parts. This too can substantially increase maintenance cost.
Propellers move a vessel forward by pushing water aft in a spiral funnel pattern. Fouled propellers rapidly loose their efficiency by inducing air bubbles into the water funnel. This is known as “cavitation.” Additionally, fouled propellers can go out-of-balance causing undesirable vibration, resulting in increased wear on the shaft, cutlass bearing, transmission and other engine and drive-train parts. This too can substantially increase maintenance cost.
PropSpeed Benefits
PropSpeed is the most cost effective way to keep your boat running at peak performance.
Boat owners and captains report 10% fuel savings and increases of up to 3 knots in speed over the life of a PropSpeed application. Most marine-growth has a difficult time adhering to the coating and simply slides off the running gear every time a vessel runs. Additionally, PropSpeed is environmentally friendly. It contains no toxic chemicals or harmful pollutants. It works because it’s slick, not because it’s toxic likely most bottom paint.
PropSpeed is the most cost effective way to keep your boat running at peak performance.
Boat owners and captains report 10% fuel savings and increases of up to 3 knots in speed over the life of a PropSpeed application. Most marine-growth has a difficult time adhering to the coating and simply slides off the running gear every time a vessel runs. Additionally, PropSpeed is environmentally friendly. It contains no toxic chemicals or harmful pollutants. It works because it’s slick, not because it’s toxic likely most bottom paint.
PropSpeed is Green!
PropSpeed works because it’s slick; not because it’s toxic.
PropSpeed does not contain any harmful chemicals or heavy metals that pollute and destroy some of the Earth’s most pristine waters.
With PropSpeed on-board you are doing your part to help preserve and keep the oceans and waterways clean for future generations.
PropSpeed works because it’s slick; not because it’s toxic.
PropSpeed does not contain any harmful chemicals or heavy metals that pollute and destroy some of the Earth’s most pristine waters.
With PropSpeed on-board you are doing your part to help preserve and keep the oceans and waterways clean for future generations.
21st Century Solution
PropSpeed, the 21st century solution to the problem of destructive marine growth on propellers and other underwater hardware. PropSpeed is a unique foul-release coating system designed to prevent marine growth from adhering to a vessel’s propellers, rudder and any metal surface below the waterline. Its slick non porous finish makes it virtually impossible for barnacles and other marine growth to gain a foot hold.
PropSpeed, the 21st century solution to the problem of destructive marine growth on propellers and other underwater hardware. PropSpeed is a unique foul-release coating system designed to prevent marine growth from adhering to a vessel’s propellers, rudder and any metal surface below the waterline. Its slick non porous finish makes it virtually impossible for barnacles and other marine growth to gain a foot hold.
FAQ's
Why should I use PropSpeed on my running gear instead of conventional bottom paint?
Conventional bottom paints do not adhere well to running gear. And in the rare cases where they do adhere, they inhibit performance. PropSpeed adheres exceptionally well to running gear and any other metal parts below the water line. In addition, PropSpeed actually increases your vessels performance.
How does PropSpeed work?
PropSpeed unique “foul release” formulation produces a surface that does not allow marine growth to permanently attach.
What parts on the bottom of my vessel should be coated with PropSpeed ?
PropSpeed can be applied to any metal part below the waterline. These parts include, props, shafts, struts, rudders, trim tabs and thru hull fittings.
What are the benefits of PropSpeed ?
PropSpeed will keep your running gear free from marine growth and will increase your vessel’s speed and reduce your fuel consumption.
Is PropSpeed environmentally friendly?
Yes. PropSpeed contains no tin, copper or pesticides.
Is PropSpeed a good value?
Absolutely! For years boaters have asked for a coating to keep there running gear free of marine growth. PropSpeed not only delivers a coating that answers this call, but will deliver higher speeds and fuel savings.
Does PropSpeed work in the harshest marine environments?
Yes. PropSpeed has been successfully tested in the harshest marine environments in the world.
How long should PropSpeed last on my vessel?
PropSpeed should last at least one year but many customers report up to two years of service.
Do I need to do anything to maintain my PropSpeed application?
PropSpeed unique “foul release” formulation is self cleaning. However, it is acceptable if your diver gently wipes PropSpeed with a non abrasive rag.
Can I haul my vessel multiple times without having to re-apply PropSpeed ?
Yes. PropSpeed can be hulled and launched multiple times without affecting its performance.
Who should apply PropSpeed to my vessel?
We recommend that you have a certified applicator apply PropSpeed on your vessel. However a well versed “do-it-yourselfer” can properly apply PropSpeed provided he follows the application guide.
Where can I purchase PropSpeed ?
PropSpeed can be purchased from most any boatyard. If your boat does not carry PropSpeed , you can find your nearest distributor on this website.
